Eco-6 Multi Zone Panel

This panel has been updated to the new Eco-6+ – click here

• 6 zone leak detection panel with built in 24hr battery back-up
• Simultaneously detects leaks on all 6 zones
• Ideally suited for small areas within residential and small commercial applications
• Compact design suits installation in utility cupboards, plant and boiler rooms, bathrooms, kitchens and air conditioning/fan coil unit drip trays
• Individual leak and cable break LED display for each zone
• Remote connection to a BMS, auto dialler or home automation system
• 110 to 240Vac operation
• Suitable for detection of water, hydrocarbon fuels and chemicals using sensing cable or probes

AT-OSP Panel (Discontinued)

• Instant detection of fuel oils, chemicals and water
• Applications include generator, oil storage and day storage tank rooms, plant areas, bunds, drip-trays and floor gullies
• Uses industry-proven optical sensor technology for quick and accurate detection
• Can be screwed into the bottom of pipe in pipe system (dual wall pipe or dual wall tank)
• Can be screwed into the side of a tank for high level indication

AT-G-ALERT – available while stocks last

AT-SRG – alternative sensor for occupied spaces

• Refrigerant gas leak detector for occupied spaces
• Easy to install
• Alarm management
• Trouble free calibration
• Low profile, neutral design (three facia plate finishes)
• Safety and the Environment (helps achieve BREEAM credits Pol 01 and Pol 02 , EN378 and F-Gas)

AT-MGS-400

Replaced by the AT-MSR Range of refrigerant gas sensors

• Mobile app interface for intuitive commissioning and maintenance
• Plug-and-play pre-calibrated sensor modules
• Pre-calibrated & temperature compensated sensors for increased reliability
• On-board audible and visual alarms for refrigerant safety compliance with BS EN378, BREEAM Pol 01 & ASHRAE 15

AT-G-DETECT (complete systems – discontinued)
Replacement sensors available to special order until January 2022

Replaced by the AT-MSR Range of refrigerant gas sensors

• 1-6 sensors connected and powered by a central panel
• Two levels of concentration alarm
• Wide range of sensor housings to suit application
• Detects refrigerants, halocarbons, hydrocarbons, combustible gases and VOC’s
• 230Vac supply required

AT-GU (Discontinued)

Replaced by the AT-SRG sensor for refrigerant gas

• State-of-the-art gas detector which uses a range of sensor head technologies to detect most gases.
• Determines the gas level present continuously
• Analogue Outputs: 0-5V, 0-10V, 2-10V or 4-20mA
• Digital Output: VFC rated 1A at 24Vdc
• Visual alarm – leak and fault
• 12/24Vdc supply required

AT-G-SENSE (Discontinued)

Replaced by the AT-SRG sensor for refrigerant gas

• Detects all refrigerants and many other gases
• Helps achieve BREEAM credits, EN378, F-Gas and EH40 Health & Safety guidelines
• Standalone unit or up to 16 can be linked to a AT-GSC-16 master panel
• Remote sensor option available
• 230Vac supply required