System Interface Module TTSIM 2

Alarm Panels

Digital Pin Point, Addressable Leak Detection & Location Panels

System Interface Module TTSIM 2
System Interface Module (slave controller) TTSIM-2v
  • This is an enhanced TT-SIM-1A, with a LCD display to show the leak location in metres or feet
  • Can be connected directly to solenoid valves, pumps and external remote alarm devices
  • Monitors all TraceTek sensing cables and AquiTron™ water, fuel oil and refrigerant gas sensors
  • Digitally displays the location of the leak and switches a relay to provide local voltage-free contact closure
  • Can be networked to a TTDM-128 master panel or connected directly to a BMS, PLC and building controls system
  • Programmable volt free contacts for connection to remote devices
  • Capable of monitoring a combination of:
    • 150 metres of any TraceTek sensing cable
    • 10 zones per SIM
    • 10 detector probes / optical sensors / float switches / immersion sensors
  • Accuracy, pinpoint to +/- 1 metre / 1 zone
  • Zone & Area naming can be added to assist in leak when connected to a TTDM-128 panel
  • LED Status Indicators: power, communications, leak, and service required
  • Available for 24Vac, 12/24Vdc, 120Vac or 230Vac power Digital BMS interface via RS-485 using Modbus RTU, OPTO 22, Metasys and volt free contacts
  • Remote connection to speech and auto diallers
Click For Datasheet
Installation & Operation
Commissioning Sheet
Modbus Register Data
TT-MPT Mapping Instructions


    Your Cart
    Your cart is emptyReturn to Shop