Accessories

AT-V-NC-BLUE-BKGND

AT-V-NC Water Solenoid Valve

  • A range of leak detection water solenoid valves
  • Pilot operated
  • Fail safe – Normally Closed
  • WRAS approved
  • Sizes from 15mm to 67mm (½” to 2½”)
More details
AT-RAP v2

Remote Alarm Panel – AT-RAP

  • Audible & visual remote alarm with mute
  • Compact design, fit in a standard single gang socket box
  • Compatible with all AquiTron™ and TraceTek alarm panels
  • Audible alarms, 90dB @ 1 metre c/w mute switch
  • Power 12/24V ac/dc
  • Can be located a maximum of 500 metres from the main panel
  • Cabling, 4 core 0.50mm2 (screened twisted pair)
More details
Sounder-beacon-300x300

Sounder/Beacon – AT-BCN-A/AT-BCN/SND-A

  • Two options available: Beacon and Beacon with a sounder
  • Power 230 Vac. 1ph
  • Compatible with all AquiTron™ and TraceTek alarm panels
  • Simply connect the beacon to the volt-free alarm relay within the panel
  • Lens colour: amber (other colours available by special order)
  • AT-BCN-A LED Beacon, Amber Lens, 230Vac, 119mm High (other voltages/colours available)
  • AT-BCN/SND-A LED Sounder/Beacon, Amber Lens, 80db Piezo Sounder, 230Vac, 119mm High (other voltages/colours available)
  • Optional 170mm High Cage Guard & Wall Mount Bracket available
More details
Relay Buzzer Unit – AT-RBU

Relay Buzzer Unit – AT-RBU

  • Provides visual and audible alarm together with two sets of SPDT volt free relays
  • Can be housed in same enclosure as TTSIM interface units
  • Operates on either 230Vac or 24Vac
DATASHEET
Installation Instructions
Indicator Warning Plate – AT-IWP

Indicator Warning Plate – AT-IWP

  • Engraved single gang stainless steel fascia with warning LED
  • 230vac or 24Vac versions available
  • Designed for connection to the alarm panel’s volt free contacts
  • Custom versions made to order
DATASHEET
Semi – Flush Mounting Flanges – AT-SFMF

Semi – Flush Mounting Flanges – AT-SFMF

  • Designed to recess the TraceTek TTDM-128 and AquiTron™ AT-SZA & AT-MZA panels into walls or the facia of control panels
  • Rigid steel construction, colour matched to each panel
DATASHEET
Speech Auto Dialler – AT-SD1, AT-SD2, AT-SD3

Speech Auto Dialler – AT-SD1, AT-SD2, AT-SD3

  • Automatically calls engineer, supervisor or external contractor when alarm is activated
  • Capable of recording 40 seconds of message
  • Configured for use with all TraceTek and AquiTron™ leak detection panels
  • SD2 also has SMS text facility
  • SD3 has GSM facility (requires a SIM card)
DATASHEET
INSTALLATION INSTRUCTIONS – AT-SD1
INSTALLATION INSTRUCTIONS – AT-SD2
INSTALLATION INSTRUCTIONS – AT-SD3
PROGRAMMING AND OPERATION INSTRUCTIONS – AT-SD3
Battery Back-Up Unit – AT-PSU24-1

Battery Back-Up Unit – AT-PSU24-1 and AT-PSU12-1

  • 24 hours battery back-up to failsafe against power failure
  • Mains present and mains failure LEDs
  • Battery overcharge feature provides long battery life
  • Optional Battery monitor relay
DATASHEET
INSTALLATION INSTRUCTIONS – 12V Version
INSTALLATION INSTRUCTIONS – 24V Version
TT-NRM

Network Relay Module – TT–NRM

  • This relay module is used to provide up to 320 individual relays
  • Relays can be individually configured within the TTDM-128 master panel to correspond to a leak within any segment of a sensing cable or a specific channel or zone
  • Can operate solenoid valves, pumps and external remote alarm devices and BMS
DATASHEET
INSTALLATION INSTRUCTIONS
Ethernet Interface Controller – AT-EIC

Ethernet Interface Controller – AT-EIC

  • 10 Mbit Ethernet connectivity
  • Password protected web based configuration and control
  • 2 digital inputs, 2 analog inputs, 1 temperature sensor input
  • Two 3A/24V relay outputs
  • SNMP v.1, SMTP, ICMP, VLAN support
  • Sending SNMP Traps messages under certain conditions
  • Sending E-mail messages under certain conditions
  • Relay restart on ping/echo timeout
  • MAC Address filtering
  • Remote FTP firmware update
DATASHEET
INSTALLATION INSTRUCTIONS