Accessories: AT-V-NC Water Solenoid Valves


	Water isolation brass pilot operated diaphragm solenoid valve WRAS approved (certiﬁcate N.1411048) 230Vac Normally Closed (fail safe) operation Manual release override Sizes from ½” to 2½” (15 to 67mm) For use with AquiTron, AquiWave and TraceTek water leak detection panels. Aquilar offers a range of water leak detection isolating solenoid valves which are fail-safe, normally closed valves – meaning it is closed in an unpowered state. In an emergency situation it is possible to manually override this and open the valve without power. Important: AT-V-NC valves are only suitable for systems with a single direction of flow. i.e. Not suitable for use where back pressure may be an issue.	Data Sheet Installation Instructions Wiring instruction video

Water isolation brass pilot operated diaphragm solenoid valve
WRAS approved (certiﬁcate N.1411048)
230Vac Normally Closed (fail safe) operation
Manual release override
Sizes from ½” to 2½” (15 to 67mm)
For use with AquiTron, AquiWave and TraceTek water leak detection panels.

Aquilar offers a range of water leak detection isolating solenoid valves which are fail-safe, normally closed valves – meaning it is closed in an unpowered state. In an emergency situation it is possible to manually override this and open the valve without power.

Important: AT-V-NC valves are only suitable for systems with a single direction of flow. i.e. Not suitable for use where back pressure may be an issue.

Data Sheet
Installation Instructions
Wiring instruction video