Why TraceTek Sensing Cable?

TT1000 Water Sensing Cable

TraceTek sensing cable employs a unique construction. Four wires are embedded into a fluoropolymer core. The red and yellow wires are low resistance, insulated wires. The two black wires have a resistance that is carefully controlled by Manufacturing. The black on the sensing wires is a conductive polymer (not insulation) There is no exposed metal to corrode, but - because of the conductive polymer, if water contacts both sensing wires - anywhere along the length of the sensing cable, it completes the circuit and the leak is detected.

The cable is of all fluoropolymer (Teflon-like) construction. The result is a small but rugged cable that is extremely resistant to corrosion and abrasion.

The unique construction leaves virtually no place to trap moisture, so it dries and clears quickly.

The four-wire TraceTek circuit allows a continual check of the system integrity.