System Interface Module (slave controller)
TTSIM-2
|
- Digitally displays the location of the leak and switches a relay to provide local voltage-free contact closure.
- Can be networked to a TTDM-128 master panel or connected directly to a BMS, PLC and building controls system
- Programmable volt free contacts for connection to remote devices
- Capable of monitoring a combination of:
- 150 metres of any TraceTek sensing cable
- 10 zones per SIM
- 10 detector probes / optical sensors / float switches / immersion sensors
- Accuracy, pinpoint to +/- 1 metre / 1 zone
- Zone & Area naming can be added to assist in leak when connected to a TTDM-128 panel
- LED Status Indicators: power, communications, leak, and service required
- Available for 24Vac, 120 Vac or 230 Vac power
- Digital BMS interface via RS-485 using Modbus RTU, OPTO 22, Metasys and volt free contacts
- Remote connection to speech and auto diallers ( AT-SD1+)
|
|
|
|
|
|
|
