::
|
Allows
a “T” or branch
in the sensing circuit, to cover any configuration
of branched piping or room layout |
::
|
The Branch Connector also adds a
simulated cable length of 5 metres to each branch
making a clear division between areas |
|
::
|
Simulates 5 metres of sensing cable
so that the system map will show a clear division
between separate areas |
|
::
|
Pin-type plastic connector for water
sensing, or metal connector for fuel oil and chemical |
::
|
End Terminations are needed at the
end of each sensing circuit and all branches |
|
::
|
Hold-down Clips attach cable to clean,
flat surfaces with pressure-sensitive adhesive |
::
|
Use a clip for each 0.8 to 1.0 metres
of sensing cable |
|
|
::
|
Battery-operated
instrument to test TraceTek sensing cables |
::
|
Allows
testing of anything from an individual length
up to 1000 metres of sensing cable |
::
|
An
ideal tool for installation, testing and maintenance |
|
|
|
::
|
Used
to link different areas of sensing cable/probes
together through walls and different floor levels,
linking to the alarm panel |
::
|
Cables
are provided on bulk 100 metre reels or with
pre installed plug and socket connectors |
|
|
